Tempered Glass Suppliers,Silver Mirror,Float Glass,Patterned Glass Manufacturer-CHINASTAR GLASS CO.,LTD

Float Glass
Patterned Glass
Processed Glass
Mirror Glass
Decorative Glass
Sheet Glass
Louver Glass
Automotive Glass


Home About Us News Factory Packing&Delivery Feedback Contact Us
Tempered Glass  

Chinastar tempered glass is made by heating flat glass to just below its softening temperature and suddenly chilling it with jets of cold air. It resultsthe outer skins under powerful compressive stress and the interior with severe tensile stress. In consequence, the impact applied to the glass will be overcome by the compressional stress on the surfaces to assure safety of use.

·Five times more resistant to breakage than normal glass
·If the glass does break, there is far less risk of injury from broken pieces.
·More opportunity for large areas of glazing without substituting your safety, including framless designs such as doors, showers, screens table tops and so on.

Ideal for use in interiors, Chinastar tempered glass can be sited in a wide variety of applications:

·All doors
·Showers and enclosures
·Stair floor
·Table top and All furniture.

Installation Guidelines
·Toughened glass cannot be drilled or any other processed and edgeworked in any manner.
·Toughened glass ordered to templates must be accompanied with a full scale template made to the correct dimensions.
·Minimum edgework finish on toughened glass up to 12mm is a standard arrissed edge. Minimum edgework on greater thicknesses should be a flat ground edge;
·Slight distortion or bowing may occur after toughening but is largely controllable. It will vary with substance, tint, surface treatment, size and shape of the glass. Ceramic painted, sandblasted or reflective coated glass has a greater tendency to bow and special tolerances would be advised. Flatness will be measured when the glass is standing on edge with a straight edge placed along the full length of the panel and a wedge measurement taken at the centre position. Refer to our technical department for more information.
Production Range
·Maximum size: 3660x12000mm, Minimum size: 100x100mm
·Thickness: 1mm ~ 25mm
·Processing: All firm orders have the drawings available will be  more efficiently and exactly working.
  Tempered Glass
Tempered Glass Line
Double Polished-Edge
Production introduction  
For detailed, technical product information on this glass, click on the corresponding product file (s)
   Tempered Glass ProcessingPDF
   Flat Tempered Glass IntroductionPDF

Add: No. 36, Miaoling Road, Qingdao 266071, China  E-mail: sales@chinastarglass.com
Tel: +86-532-6872 1000   Fax: +86-532-6872 1166